Spacers & Adapters
Filter
-
4 pack of height packers compatible with Prorack Heavy Duty bars. Provides 15 mm extra height between vehicle roof and bottom of bar.$29.00 -
Do you have a canopy that's higher than your cab? These height packers are ideal to level your Prorack HD crossbar across your vehicle or to just add some clearance to your existing crossbars. TP1 - set of 2 packers TP2 - set of 4 packers TP3 - set of 6 packers TP4 - set of 8 packers -
Works with LockNLoad bars to give an extra 30 mm height clearance.$37.50 -
Works with LockNLoad crossbar to give an extra 22.5mm height clearanceHeight packers used below fixed point and track legsPack of 6 to suit a single crossbar$35.00 -
The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.$26.00 -
15 Extension Pads 15 Pack Of 2$39.95 -
The PLHS1 Pioneer Leg Height Spacers are designed to raise the Pioneer Roof Trays to allow the legs to slide out wider onto the Rhino-Rack Backbone system developed for the JEEP JK Wrangler. 4 spacers are included in this kit.$49.00 -
Pivot Height Spacers are blocks that are placed between the leg unit and the cross bar to correct the cross bar angle on vehicles that utilize curved tracks. Because so many vehicles now have erratic differing roof lines, tracks are being shaped and curve -
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an e$89.00 -
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of 6 spacers will give you an extra 18mm of height to work with.$29.00 -
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This set of 4 spacers will give you an extra 12mm of height to work with.$24.00 -
Need a bit of extra height on your Heavy Duty CXB roof rack bars? This pair of spacers will give you an extra 6mm of height to work with.$16.00 -
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.
$19.00 -
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.
$19.00 -
Spacer blocks are useful to obtain a level height between all of the crossbars on your vehicle. Installation is a breeze - simply place the spacers between the leg unit and the crossbar of your roof rack until all of the crossbars have been raised to an even level.
$36.00 -
The Pioneer Leg Height Spacers (5mm) used to level a Pioneer system on a vehicle. This kit contains 2 x 5mm height spacers.$25.00 -
The Heavy Duty ROC25 Spacer (25mm) allows you to fit a Rhino-Rack Heavy Duty Bar to the RLKVO leg. This kit fits 1 bar.$16.00 -
The Heavy Duty ROC25 Spacer (15mm) allows you to fit a Rhino-Rack Heavy Duty Bar to the RLKVO leg. This kit fits 1 bar.$12.00 -
The Heavy Duty ROC25 Spacer (20mm) allows you to fit a Rhino-Rack Heavy Duty Bar to the RLKVO leg. This kit fits 1 bar.$14.00 -
The Vortex ROC25 Spacer (20mm) allows you to fit a Rhino-Rack Vortex Bar to the RLKVO leg. This kit fits 1 bar.$17.00 -
The Heavy Duty ROC25 Spacer (5mm) allows you to fit a Rhino-Rack Heavy Duty Bar to the RLKVO leg. This kit fits 1 bar.$9.00 -
Increases height between your TrimHD crossbar and StreamLine legs. Handy for levelling bars on canopy and custom fits. -
Increases height between your TrimHD crossbar and StreamLine legs. Handy for levelling bars on canopy and custom fits. -
Increases height between your TrimHD crossbar and StreamLine legs. Handy for levelling bars on canopy and custom fits. -
Increases height between your TrimHD crossbar and StreamLine legs. Handy for levelling bars on canopy and custom fits. -
The Quick Mount Ditch Bracket provides a permanent or fixed mounting point for the roof rack to attach to.$66.00 -
Fits TrimHD bars to StreamLine legs including BaseLine, SightLine, SkyLine, TimberLine through FX (flush) range.$20.00 -
The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.$18.00 -
The Quick Mount Ditch Bracket provides a permanent or fixed mounting point for the roof rack to attach to.$50.00 -
The Quick Mount Ditch Bracket provides a permanent or fixed mounting point for the roof rack to attach to.$60.00 -
The QMFK13 is a fitting kit used to attach the Quick Mount -
The QMFK12 is a fitting kit used to attach the Quick Mount -
The QMFK11 are 4x M6 Nuts for a pair of RLT600 legs.$12.00 -
The Quick Mount Ditch Bracket provides a permanent or fixed mounting point for the roof rack to attach to.$81.00 -
The Quick Mount Ditch Bracket provides a permanent or fixed mounting point for the roof rack to attach to.$81.00 -
The Quick Mount Heavy Spacer allows you to fit the Rhino-Rack Heavy Duty Bars to RLT600, RCH and RCL legs. This kit fits 1 bar.$21.00
